Prepared

Checked

Approved

Dewei Zhang

Jiayan Huang

Juntang Liu

Date

Rev

Product model

2008-6-16

A

CZJ-600S/30.60A 1

CONTACTOR

1

GENERAL

Magnetic latch.

DC-pulse to coil closes the contacts. DC-pulse reverse to coil opens the contacts.

Polarity when closing contactor “+” coil terminals to plus, “-” coil terminals to minus at the coil terminal.

For continuous use. 1-pole, normally open (NO). May be ordered with auxiliary switch.

Can be mounted vertically or horizontally. (if mounted vertically the coil should be at the bottom).

2

DESIGN

2.1

GE NERAL

Open 1-bridge contacts.

2.2

VITAL SAFETY REQUIREMENTS

This article forms part of a product with a special safety approval.

Changes must not be introduced without previous confirmation by the design responsible .The following requirements must be fulfilled.

The following requirements must be fulfilled.

a U L -recognized component: QPQY2.

b Flammability class: U L 94-V0.

2.3

MATERIAL SPECIFICATION AND REQUIREMENTS

Contact housing:

U L -R/C Plastics (QMFZ2), Phenolic, U L 94 V-0, min. 150 ℃

Bobbin case:

U L -R/C Plastics (QMFZ2), PBT3316, 0.5mmmin. UL94-V0, min. 140 ℃

Coil mounting bracket:

Steel, Zn plated

Tab

Brass or equivalent

Shrinking tube:

U L -R/C tubing (YDPU2)

Coil wire:

U L -R/C wire, temp class H

Coil and aux. switch terminals:

Brass

Main contact bar:

Copper with silver surface treatment

Main contact tip:

Silver alloy

2.4

CIRCUIT DIAGRAM

2.5

DIMENSIONS All dimensions in mm

3

LIMITING VALUES reference temp .20 ℃

Quantity

Condition

Values

Unit

Voltage, coil

DC-pulse

See product list

V

Voltage, main contact

Resistive load

See product list

V

Rated current, main contact

DC-current

See product list

A

Typical voltage drop across main contacts

At rated 100A

80

mV

DC-plus duration

200 ～ 1000

ms

Ambient temp.

-25~+60

℃

Temp, on terminals

Acc. to UL

105max

℃

Auxiliary switch rated current

At 24V dc

5

A

At 48V dc

2

A

Life cycles, Electrical

At rated load

10000

Operations

Weight

Approx.

0.98

Kg

4

MARKING AND PACKAGING

The component and package shall be marked with following information

a)

The type designation of manufacturer.

b)

The manufacturer name (or trade mark on the component).

c)

Date of manufacturer, year and week or batch code.

d)

The number of components (only valid for package).

e)

An indication on the case to identify a specific terminal. (Only valid for the component)

5

PRODUCTLIST

Product model

CZJ-600S/30 · 60A 1

Product number purchased

Coil voltage (V)

30

Main contact voltage (V)

60

Rated current (A)

600

Coil resistance ( Ω )

30min

Coil voltage for safe operation

To close (V)

18max

To open (V)

18max

Aux. Switch

Yes

Cable connection

No